Google+ Uncertainty Quantification of Concrete Utilized in Dry Cask Storage | Educating the Next Generation of Leaders in Nuclear Security Sciences
Skip navigation

Citation:

R. Kelly, P. Tsvetkov, S.S. Chirayath, J. Poston, E. Kitcher, "Uncertainty Quantification of Concrete Utilized in Dry Cask Storage," Nuclear Technology 190:1 (2015).

Abstract:

The objective of this paper is to analyze the uncertainty in radiation dose rate estimates outside of a used nuclear fuel (UNF) dry cask storage unit due to the parametric variability of concrete compositions and densities. This requires the selection of a limited number of concrete compositions from a standardized database and the development of a reference dry cask model, which can be used to estimate dose rate from neutrons and gamma rays. The model was developed for use in calculations with MCNP, with reference data from a UNF assembly source and geometry details based on the Holtec HI-STORM 100S UNF dry cask storage system, both provided by the Comanche Peak nuclear power plant. A number of cases have been developed and analyzed to compare the effects of variations in concrete compositions considering nominal densities, variations from nominal densities, fixed densities regardless of the specific composition, and variations in the decay source. The analysis confirmed that the parametric variability of concrete compositions is a major source of uncertainty in evaluations of dry cask dose rates. While precise results depend on the compositions compared, general trends can be identified. The largest fraction of the dose value in all cases, typically 70%, is due to gamma rays produced by the fission products. Density variation had a dominant effect on the dose rate. Composition variations, while density was held fixed, indicated that the specific composition data significantly impact the dose rates produced by neutrons and associated capture gamma rays. The impact due to composition variation on neutron dose rate was found to be on the order of 70% or higher for these test cases. The analysis indicates that uncertainties in concrete characteristics at the time of on-site pour procedures impact the actual shielding efficiency and, therefore, must be evaluated.

See Document

View Sitemap